Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Quotes@OnboardScaleSystems.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Standard RS-232 Wiring Procedure

 

Standard RS-232 wiring
 
Pin No. Description Function
1 Data Carrier Detect (DCD) DTE input, data link established, also known as Receive Line Signal Detect (RLSD)
2 Received Data (RD) DTE input data
3 Transmitted Data (TD) DTE output data
4 Data Terminal Ready (DTR) DTE output, device ready
5 Ground provides a Zero reference voltage
6 Data Set Ready (DSR) DTE input, DCE is ready to communicate
7 Request to Send (RTS) DTE output, DTE would like to transmit
8 Clear to Send (CTS) DTE input, DCE is ready to transmit
9 Ringing Indicator (RI) DTE input, announces incoming call
What is DTE and DCE ?

Data Terminal Equipment (DTE) is typically either a dumb terminal or the serial port on a computer/workstation.
Data Communications Equipment (DCE) is typically a modem, DSU/CSU, or other piece of data communications equipment.

How connections are established between a DTE and DCE ?

The pin specifications of RS232 are written from the perspective of DTE end of link. so, the output from DTE becomes a input to DCE. Thus, Transmitted Data (TD) is a output signal for DTE, but it becomes a input signal for a DCE.
To connect a DTE and DCE, we just need a straight (pin-to-pin) cable. If we want to connect two DTE with each other then, a cross-over cable is required. this just makes each DTE feel that it is connected to a DCE at other end.

 

OnBoardScaleSystems.com
Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.
Quotes@OnboardScaleSystems.com

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
sales@OnboardScaleSystems.com
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.