Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Quotes@OnboardScaleSystems.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Loss-in-Weight Dispensing Controls Scales

920i FlexWeigh 104
Loss-in-Weight Dispensing Controls Scales
Print, Tare, Weigh (2 Speed Dispense), Print, Hold
 
 

Pre-engineered and pre-programmed 920i FlexWeigh Systems are Rice Lake’s turnkey answer to many of manufacturing’s most commonly used weighing processes, providing clearly defined, immediate solutions for almost any operation. 920i FlexWeigh Systems combine the power and versatility of the 920i interface with the simplicity and strength of the FlexWeigh control panel.

No need for lengthy quoting or design obstacles. Each 920i FlexWeigh model is a standard design in its own right, factory tested and programmed for the task at hand. Stainless steel NEMA-4X enclosures and rugged, customizable operation switches guarantee industrial-strength and dependability, day after day, year after year.

Once you’ve selected the right model for the job, your 920i FlexWeigh System is shipped complete and ready to weigh, seamlessly transitioning almost any measurement task, into a fully automated weighing process.

Standard Features
  • Wallmount stainless steel enclosure
  • Application program 101, 102, 103, 104
  • Front panel switches: E-Stop, reset/resume, start
  • Softkeys for presets, CN#, ID#, formula#, totals
  • Accumulating subtotal & total registers
  • Transmitted audit trail
  • Digital I/O Board
  • Relay rack and SSR relay outputs

Application:
The 920i FlexWeigh 104 is designed for applications where a preset target weight is repeatedly dispensed from removable vessels or containers that may become empty during the sequence of a dispense. When an empty supply is detected, the system will prompt for more supply. When pressing Start, the system automatically tares the scale, starts the loss-in-weight dispense from zero, and stops as programmed; all while transmitting and storing

Dispensing Materials - Print, Tare, Weigh (2 Speed Dispense), Print, Hold
Use the following steps to dispense material from a scale.

1. Press the Start button on the unit. The system verifies the E-Stop button is pulled out and a valid target weight has been entered. The system then:
• Increments the consecutive number by one
• Tares the scale to zero (net mode)
2. The system begins dispensing either of three speeds while a 920i displays real time sequence progress.
Those three dispensing speeds include:
• Single speed dispensing - The system turns on fast fill until the target weight/preact weight is satisfied.
• Parallel speed dispensing - Turns on the fast fill and slow fill until the dribble weight is satisfied. The system then turns off the fast fill and leaves the slow fill on until the target weight/preact weight is satisfied.
• Dual speed dispensing - Turns on the fast fill until the dribble weight is satisfied. The system turns on the slow fill until the target weight/preact weight is satisfied.
3. If during the dispensing cycle the system determines that the material supply on the scale has run empty, the system will pause the automatic process and prompt for a resupply of material. The current dispensing process can resume from where it left off by pressing Start.
4. The system does the following when the target/preact is reached.
• Turns off the output based on the dispensing mode.
• Updates the subtotal weight and number of dispenses
• Updates the total and number of dispenses
• Turns on the Dispense Complete output.
5. The system delays for the Delay After Dispense time

Standard Features:
• Stainless Steel NEMA 4X enclosure
• Pre-programmed and configured 920i HMI Indicator/Controller
• Heavy-duty push buttons and switches E-stop, Start, Reset/Resume
• Built-in safety interlocks prevent start without adequate weight to complete cycle
• (2) 2amp, 120 VAC feed output (fast and slow feed)
• Emergency stop which can be resumed at any point
• Auto Tare on START
• Auto Print and Weight Total

Options:
• Switches for manual-override control
• Large-diameter pilot lights
• 120 VAC outputs for: Dispense Complete and Slow Cycle
• Customized software and hardware configurations
Model Discription
Flexweigh-104 Indicator, 920i Flexweigh Systems 104, Stainless Steel Wallmount, 115/230VAC

 

 

Notice: Your State Required us to pay your State Sales Tax with this manufacture.
California, Florida, Hawaii, Maryland, Massachusetts, Mississippi
One of our manufacture's (Rice Lake Weighing System) has a presence in the states listed below. These States will not honor our tax certificate. Our only option is to charge sales tax at a flat rate of 10% for any Rice Lake Weighing System, brands or products. To avoid paying sales taxes please provide tax exempt paper work for your company.
Note: California: has a drop ship tax - CA SALES TAX - 10% DROP SHIP

OnBoardScaleSystems.com
Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.
Quotes@OnboardScaleSystems.com

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
sales@OnboardScaleSystems.com
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.