Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Vulcan OnBoard Hydraulic Forklift Scale System



Vulcan OnBoard Hydraulic Forklift Scale System (Overload Checker)
Fits any size Forklift - Simple to Use - Easy to install
The extreme durability and reliability of our hydraulic on-board forklift scales is due to our  sensor technology.  
The Vulcan's Hydraulic scale system works on all lift truck scales and forklift scales.
  • Hydraulic scale system
  • Kit includes weight terminal(meter), pressure sensor, extra cable & manual
  • Simple installation
  • DC power
  • Designed for heavy duty industrial use
  • Not legal for trade
  • Hydraulic fittings or hose not included
  • Accuracy 97% (3% of gross capacity) Used as overload checker
  • Comes with 1 year MFG warranty & everything needed for install minus the "tee" fitting or hydraulic hose if needed.
CAPACITY: Designed for use in environments where pressure does not exceed 3000 psi
MATERIAL: Heat treated stainless steel sensor enclosed in a rugged corrosion resistant housing.
PORT SIZE: 9/16-18 SAE straight thread, o-ring fitting (SAE: -6)
SENSOR ACCURACY: System accuracy typically within 1% of GVW depending on application and environmental factors.
OUTPUT: 2.0 mv/V @ 3000 psi.
Find a suitable location to “T” into the hydraulic line between the hydraulic lift cylinder.
V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)
The onboard scale system for forklifts is a programmable system designed to measure the peak load. This system operates by analyzing the peak signal over a programmable time interval while the load is being picked up. This is a major time savings over existing static weighing systems for fork lifts. Businesses spend thousands more on a fork lift systems that take more time for the operator to use while delivering far less accuracy then this system. This system has a proven track record with less than 3% error of total capacity. This system uses a patented digital encoder technique which is immune to moisture and other noise sources. Why settle for an imitation when you can have the original. Simple to use yet durable and the most affordable system for the investment available.
Average installation time 2-3 hours. Install the 1- hydraulic pressure load cell on the high side of the system, mount your indicator, calibrate with full capacity for best results. The scale can operate in Pound or Kg mode. With display resolutions in 5, 10, 20, 50, 100 or 200 based on capacity of your forklit. 12 VDC System only. 1 Year Manufactures Warranty.
Systems Requirements: These systems require that your hydraulic systems meet manufactures standards. Leaks in your hydraulic system may degrade the performance this system. Not recommended for smaller fork lifts under 2000 lbs. But we have found most of them to work just fine.
Systems Use Requirements for Repeatability: Before recording the weight. Center the forks, Raise forks off the floor same level each time, Tilled fork back to the same location. Remember this is a hydraulic system, any change from this format will affect the weight reading. We require that you calibrate your scale with full capacity using this setting.
Model Wired Description Ship Wt: Notice
Vulcan-H-Forklift-SS-41 V320 Meter, Cables, Hydraulic Pressure Sensor, Manual - Customer to provide T connector. 8 lbs. Installable System: This item is non-refundable.




Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.