,
Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Quotes@OnboardScaleSystems.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Vulcan General Trucking / Air Ride Single Point and Spring Suspension Scales

 

System Accuracy: Typically
+/- 1% of full scale load or better.
Air Ride Slightly less accurate
Installation Pictures
 
Tractor & Trailer Air Ride Scale Tractor Single Bag Air Ride Scale Tractor Dual Bag Air Ride Scale Tractor Fifth Wheel Load Cell Scale
Tractor Holland Fifth Wheel Load Cell w/slider Single Point Suspension Trailer Spring Suspension 3 or 4 axles Bulk Carrier/ Box Trucks Scale

Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.

Mix and match: Tractors & Trailers. Because calibration is store in the VSL Vulcoder for the tractor and the trailer. You can have and use any trailer with and tractor and the calibration will be correct.

Vulcan Scales = Innovation
Were proud to announce the latest innovation by Vulcan scales "Cast Load Cell". Designed for the Holland ILS fifth wheel slider.
One of the benefits design is that it reduces the install time for a standard fifth wheel slider kit by 6 to 8 hours. Easy to install, No welding required, just bolted it on.
An added benefit because of the bolt on design. It is easily moved to a different tractor if needed.
Vulcan scales also offers the new optional indicator upgrades with printer ports (RS-232) for the V320 and the V340 indicators.
Four ways to keep ahead of the competition
1.

Know the competition. Find out who your competitors are, what they are offering and what their unique selling point (USP) is. This will identify the areas you need to compete in, as well as giving you a platform for differentiating yourself.

2.

Know your customers. Customer expectations can change dramatically when economic conditions are unstable. Find out what matters to your customers now - is it lower price, more flexible service, and the latest products to improve efficiency.  Vulcan weighing system once again, is the product to increase efficiency for you and your customer. Revise your sales and marketing strategy accordingly.

3.

Differentiate. It's essential to give your customers good reasons to come to you rather than a rival. Your USP should tap into what customers want and it should be clear and obvious - no-one should have to ask what makes you different Vulcan weighing system with fast, accurate weights on site for the customer to see.

4.

Look to the future. Businesses that plan for growth are more successful than those that are happy to stay still. Keep up with developments in your sector, follow consumer trends, invest in new technology and - crucially - have a clear idea of where you want to be in one, three and five years' time. Vulcan weighing system will help you achieve efficiency and your customer will feel confident that he's only paying for what he needs.

We have your weighing solution for Air-ride, Single Point and Spring suspensions 2, 3 and 4 axles. Obtain axle and or payload weights on trailers. Choose from our standard packages or our custom configurations whatever your application, we’ll find the solution!

We works hard to make things easy for you. We have developed our custom manuals and instruction for a faster and easier install and calibration.  Saving you time and money is just one of the benefits of making your purchase though us.
System Accuracy: Typically +/- 1% of full scale load or better for load cell systems - Air Ride +/- 2 to 3%.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.

V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)

VSL Vulcoder:

  • Size: 5.0”W x 2.5”D x 1.5”H (one and two lead Vulcoders)
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
Optional Upgrade
The NEW V-320S Printer port (RS-232 output)
The NEW V-340S Printer port (RS-232 output)
The Vulcan V300 Series Electronics System combines the most advanced electronics with a user-friendly operation. The system works with existing Vulcan load cells and sensors. The V300 Series is ideal for applications requiring up to four channels, and for operators who wish to mix tractors and trailers.
  • Compact size allows the meter to be mounted almost anywhere
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Automatically identifies and adjusts for different truck/trailer configurations
  • Select the two channel V320 or the four channel V340 meter depending on your application
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • Simple operation and calibration
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Complete system troubleshooting including individual load cell diagnostics
  • V-300 series Spec Sheet
G-103 Tractor & Trailer Air Ride Scale System

The Vulcan all-digital air scale system for tractor / trailer combinations provides an accurate way to obtain axle and/or payload weights. Corrosion resistant, stainless steel air sensors provide a rugged and reliable solution well suited to meet the requirements of on-board trucking applications. Air sensors are altitude and temperature compensated to enhance performance and accuracy. Vulcan VSL electronics allow unlimited mixing of tractors and trailers without any adjustments.

System Accuracy: Typically +/- 2-3% of full scale load or better

Ship Wt: 18 lbs.  Estimated install time: 10­12 HOURS
VSL pressure sensor spec sheet See PDF
Installable System: This item is non-refundable.
G-203 Tractor Single Bag Air Ride Scale System

The Vulcan corrosion resistant, stainless steel, all-digital air sensor provides an accurate scale system to obtain drive axle weights when connected to a trailer. The air sensor is altitude and temperature compensated to enhance performance and accuracy. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustment.

System Accuracy: Typically +/- 2-3% of full scale load or better

Ship Wt: 10 lbs.
Installable System: This item is non-refundable.
G-203D Tractor Dual Bag Air Ride Scale System

The Vulcan corrosion resistant, stainless steel, dual port air sensor provides an accurate scale system to obtain drive axle weights when connected to a trailer. The air sensor is altitude compensated to enhance performance and accuracy. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustment.

System Accuracy: Typically +/- 2-3% of full scale load or better

Ship Wt: 16 lbs.
Installable System: This item is non-refundable.

G-213 Tractor Fifth Wheel Load Cell Scale System
Holland 3500 Series
Fontaine 5000
Simplex II
Ottawa/Kalmar

The Vulcan fifth wheel load cell tractor scale system provides a proven, accurate, and reliable system to obtain drive axle weights when connected to a trailer. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustments.
Ship Wt: 112 lbs.  Estimated install time: 5 to 10 HOURS
5th wheel load cell spec sheet PDF
Vulcan-G-213-L04 = Holland Fifth Wheel
Vulcan-G-213-L05 = Fontaine Fifth Wheel
Vulcan-G-213-L31 = Simplex Fifth Wheel
Installable System: This item is non-refundable.
G-223 Tractor Holland Fifth Wheel Load Cell w/slider
The Vulcan Holland fifth wheel load cells with slider scale system provides a proven, accurate, and reliable system to obtain drive axle weights when connected to a trailer. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustments.
Ship Wt: 194 lbs.  Estimated install time: 10 to 12 HOURS
Technical Installation Information
5th wheel load cell spec sheet PDF
Installable System: This item is non-refundable.
G-233 Tractor Long Holland Fifth Wheel Load Cell w/slider
The Vulcan 26" Super-Beam load cells with quick change straps and slider kit for a long Holland fifth wheel provides a proven, accurate, and reliable system to obtain drive axle weights when connected to a trailer. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustments.
Ship Wt: 230 lbs.  Estimated install time: 10 to 12 HOURS
5th wheel load cell spec sheet PDF
Installable System: This item is non-refundable.
G-ILS Holland ILS Fifth Wheel Slider Load Cell
The Vulcan Holland ILS fifth wheel load cells scale system provides a proven, accurate, and reliable system to obtain drive axle weights when connected to a trailer. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustments.
These load cells are designed specifically for the Holland ILS FW 35 series sliding fifth wheel. They are a direct replacement for the existing Holland slide brackets and will fit on both the inboard and outboard style slide tracks. The load cells provide real time weight information while maintaining the low trailer height of the ILS design.
Reduce install ion time by 6-8 hours vs installation time for fixed 5th wheel load cell.
Easy to install. Bolts on and off, no welding required.
Easily moved from truck to truck.
Replaces the existing Holland ILS
Includes a urethane 5th wheel bushing for longevity.
The only Holland ILS Fifth Wheel Scale System on the market!(Currently Made to Order Only)
Ship Wt: 120 lbs.  Estimated install time: 4  HOURS
Installable System: This item is non-refundable.
G-300 Trailer single Bag Air suspension Scale system

The Vulcan corrosion resistant, stainless steel, all-digital air sensor and state-of-the-art electronics provide axle and/or payload weights for trailers with air suspensions. The air sensor is altitude and temperature compensated to enhance performance and accuracy. Vulcan VSL electronics allow unlimited drop and hook capabilities to any tractor equipped with Vulcan air or spring suspension scale systems to provide total payload weight.

System Accuracy: Typically +/- 2-3% of full scale load or better

Ship Wt: 8 lbs.
VSL pressure sensor spec sheet See PDF
Installable System: This item is non-refundable.
G-300D Trailer Dual Bag Air suspension Scale system

The Vulcan corrosion resistant, stainless steel, air sensor and state-of-the-art electronics provide axle and/or payload weights for trailers with air suspensions. The air sensor is altitude and temperature compensated to enhance performance and accuracy. Vulcan VSL electronics allow your trailer to drop and hook to any tractor with Vulcan VSL electronics to provide total payload weight.

System Accuracy: Typically +/- 2-3% of full scale load or better

Ship Wt: 14 lbs.
Installable System: This item is non-refundable.
G-310 Trailer Spring Suspension Scale system
The unique Vulcan center hanger mounting kit and Super- Beam load cell scale system provides a proven, accurate, and reliable way to obtain axle and/or payload weights on trailers with spring suspensions. Vulcan VSL electronics allow your trailer to drop and hook to any tractor with Vulcan VSL electronics to provide total payload weight.
Ship Wt: 130 lbs.  Estimated install time: 10 to 12 HOURS
Center hanger bracket installation
Center hanger bracket spec sheet See PDF
Note: will not work on No-Hop Suspensions See PDF
Installable System: This item is non-refundable.
G-320 Trailer Single Point Suspension Scale system
The Vulcan L03 single point trailer scale system provides the most accurate method for obtaining axle and/or payload weights on trailers with single point suspensions. This Vulcan system is the industry standard for scaling single point suspension trailers. Vulcan VSL electronics allow your trailer to drop and hook to any tractor with Vulcan VSL electronics to provide total payload weight.
Ship Wt: 137 lbs.  Estimated install time: 10 to 12 HOURS
Single point load cell spec sheet See PDF
Installable System: This item is non-refundable.
G-340 Trailer Spring Suspension 3 or 4 axles Scale system
The unique Vulcan center hanger mounting kit and Super- Beam load cell scale system provides a proven, accurate, and reliable way to obtain axle and/or payload weights on trailers with spring suspensions. The system utilizes four center hanger mounting kit and load cell assemblies allowing you to scale spring suspension trailers with three or four axles. Vulcan VSL electronics allow your trailer to drop and hook to any tractor with VSL electronics to provide total payload weight.
Ship Wt: 262 lbs.  Estimated install time: 7 to 12 HOURS
Center hanger bracket installation
Center hanger bracket spec sheet PDF
Note: will not work on No-Hop Suspensions See PDF
Installable System: This item is non-refundable.
G-603 Bulk Carrier Scale System
The Vulcan fixed body bulk carrier scale system is designed for fix mounted bulk carrier configurations such as solo tankers. The scale system measures gross vehicle and net payload weights, using proven technology to give you the reliability and accuracy you expect.
6-15" Load Cells (75,000lb Max w/ dead load)
Ship Wt: 256 lbs.  Estimated install time: 30 to 40 HOURS
Installable System: This item is non-refundable.
G-213H-H Holland Fifth Wheel Scale system
G-213H-S Simplex Fifth Wheel Scale system
Heavy Capacity Fifth Wheel Solutions
Heavy Capacity Fifth Wheels: 50k Total Capacity (2- 26" Super Beam Heavy Duty  25k capacity load cell) - Holland or Simplex
Load Cell: 26” Side Connector Static Capacity: 25,000 lbs vertical load, 50,000 lbs vertical load (Heavy Duty only). Safe Overload: 300% dynamic capacity. Accuracy: Typical system error less than .5% full scale. Material: Customized 4340 steel, heat treated for optimum strength. Finish: Vulcan load cells are cad/chromate plated for increased rust protection.
Ship Wt: 103 lbs. Estimated install time: 5 to 8 HOURS
Installable System: This item is non-refundable.
Lowboys Trailers - Suspension: Haulmaax or AirRide
The Vulcan Deflection transducer can be installed on several types of truck and trailer suspension. The Vulcan corrosion resistant, stainless steel, dual port air sensor provides an accurate scale system to obtain drive axle weights when connected to a trailer. The air sensor is altitude compensated to enhance performance and accuracy. Vulcan VSL electronics allow unlimited drop and hook capabilities to trailers equipped with Vulcan air or spring suspension scale systems without any adjustment.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Installation times are estimates on first time installations only. Actual installation times are dependent on the skill level of the mechanic and number of mechanics, shop equipment, on the need to possibly relocate other equipment on the truck or trailer.
General Trucking Tractor Trailer systems Description Ship Wt: Notice Price
Vulcan-G-103

Tractor Trailer Semi Scale System All Air Suspension:
(1) M32 V320 METER
(2) Cxx ORANGE CABLES
(2) L40 VSL AIR SENSORS - SINGLE PORT
(2) 49-10116-001 RIDE HEIGHT CONTROL VALVES (OPTIONAL)

18 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-203

Tractor Only Scale System Single Ride Height Control Valve / VSL Air Sensor:
(1) M32 V320 METER
(1) Cxx ORANGE CABLE
(1) L40 VSL AIR SENSOR - SINGLE PORT
(1) 49-10116-001 RIDE HEIGHT CONTROL VALVE (OPTIONAL)

10 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-203D

Tractor Only Scale System Dual Ride Height Control Valve / Dual Port Air Sensor:
(1) M32 V320 METER
(1) Cxx ORANGE CABLE
(1) V26 VSL VULCODER - 1 LEAD
(1) L21 AIR SENSOR - DUAL PORT
(2) 49-10116-001 RIDE HEIGHT CONTROL VALVE (OPTIONAL)

16 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-213-L04 = Holland Fifth Wheel
Vulcan-G-213-L05 = Fontaine Fifth Wheel
Vulcan-G-213-L31 = Simplex Fifth Wheel

Tractor Only scale System Fifth Wheel Load Cells:
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) Lxx FIFTH WHEEL LOAD CELLS
(2) H11 19" FIFTH WHEEL MOUNTING KITS

112 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-223

Tractor Only Scale System Holland Fifth Wheel Load Cells with Slider:
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) L04 FIFTH WHEEL LOAD CELLS
(1) H12 19" HOLLAND SLIDER KIT

194 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-233

Tractor Only Scale System 26” Super-Beam Load cells w/ Quick Change and Holland Slider Kit:
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) L08 26" SUPER-BEAM LOAD CELL - SIDE CONNECTOR
(2) H15 26" SUPER-BEAM QUICK CHANGE STRAP, HOLLAND
(1) H16 26" SUPER-BEAM SLIDER KIT, LONG HOLLAND

230 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-ILS Slider (Currently Made to Order Only)

Tractor Only Scale System ILS Cast Load cells Kit: (Currently Made to Order Only)
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) L08 26" SUPER-BEAM LOAD CELL - SIDE CONNECTOR
(2) ILS Cast Load Cells

120 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-300

Trailer Only Scale System Single bag Air Suspension / VSL Air Sensor:
(1) Cxx ORANGE CABLE
(1) L40 VSL AIR SENSOR - SINGLE PORT
(1) 49-10116-001 RIDE HEIGHT CONTROL VALVE (OPTIONAL)

8 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-300D

Trailer Only Scale System Dual Ride Height Control Valve / Dual port Sensor:
(1) Cxx ORANGE CABLE
(1) V26 VSL VULCODER - 1 LEAD
(1) L21 AIR SENSOR - DUAL PORT
(2) 49-10116-001 RIDE HEIGHT CONTROL VALVE (OPTIONAL)

14 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-310

Trailer Only scale System Spring Suspension:
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) L02 15" SUPER-BEAM LOAD CELLS
(2) H32 CENTER HANGER MOUNTING KITS

130 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-320

Trailer Only Scale System Single Point Suspension:
(1) V23 VSL VULCODER - 2 LEAD
(1) Cxx ORANGE CABLE
(2) L03 17" SINGLE POINT LOAD CELLS
(2) H10 17" SHEAR BEAM MOUNTING KITS

137 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-340

Trailer only scale System Spring Suspension, 3 or 4 Axles:
(1) V24 VSL VULCODER - 4 LEAD
(1) Cxx ORANGE CABLE
(4) L02 15" SUPER-BEAM LOAD CELLS
(4) H32 CENTER HANGER MOUNTING KITS
Note: Not suitable for trailers with No-Hop design suspension. Please contact factory for details.

262 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-603

Bulk Carrier Scale System:
(1) M32 V320 METER
(1) V25 VSL VULCODER - 6 LEAD
(6) L01 15" SUPER-BEAMS - END CONNECTOR
(6) H01 15" SUPER-BEAM MOUNTING KITS
(4) H02 15" SUPER-BEAM SPRING KITS

256 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-213H-H = Holland Fifth Wheel
Vulcan-G-213H-S = Simplex Fifth Wheel

Heavy Capacity Fifth Wheel Solutions
(1) - M32 V320 Meter
(1) - V23 VSL Vulcoder - 2 lead
(1) - Cxx Orange Cable
(2) - L11 26" Super Beam Heavy Duty
(2) - Hxx Quick Change Straps

103 lbs Installable System: This item is non-refundable. Call for Best Pricing
The Vulcan V700 Electronics System

The highest quality on-board scale electronics for the trucking industry. The Vulcan V700 Electronics System makes it possible to view the on-board scale information remotely. The V700 Transmitter monitors the information on the VSL line and transmits the data to the V700 Display.

V-700 series Spec Sheet

KEY FEATURES:
Provides a remote display of weight information from Vulcan V320, V340,V500, and V600 meters.
Advanced spread-spectrum RF technology for reliable data transmission
Range: Typically 200 ft (depending on conditions)
Quick response time - updates once every second
V700 Display:
Large easy-to-read LCD with backlight
Displays up to 4 VSL channels with subtotals and grand total
User selectable features:
Gross, Net, Pickup/Deliver operation modes
Units (pounds, kilograms, or tons) independent of the meter setting in the truck
Grad size independent of meter setting
Off, low, and high backlight settings
Auto-off after 1, 2, 3, or 4 minutes (plus always on)
Can operate over 30 hours on 2 AA batteries
Battery level indicator
Includes case and neck lanyard
V700 Transmitter:
Automatic plug and Play VSL interface, simply splice it into the VSL line
Seven user selectable RF frequencies to reduce interference
Rugged, easy-to-mount enclosure
Optional Upgrade to the V-600 Series

V600 Meter:

  • Display:
    • LED, variable brightness
    • Primary: 6 -.7” high characters
    • Secondary: 16 - .2” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 2.6”D x 3.6”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10.5 to 29.0 Vdc
  • Current Draw: .7 to 2 amps
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: 27.8 oz (including mounting bracket)

 

VSL Vulcoder:
  • Size: 5.6”W x 4.6”D x 1.5”H
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
  • Connectors: Military grade with dual environmental seals

 

The Vulcan V600 Electronics System combines the most advanced electronics with a user-friendly operation. Works with existing Vulcan load cells and sensors. Ideal for applications requiring more than two channels, set points, recording weight information, interface to on-board printers and computers, or operators who wish to mix tractors and trailers.
  • Easy to Calibrate
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Handles up to 6 channels
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • 16-character, LED, dot-matrix secondary display for user-friendly meter interface
  • Simple operation with auto-calibrate feature
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Printer interface with date and time
  • Set points with relay drivers to control lights and alarms
  • Interface to on-board computers
  • Configurable for custom applications including weigh-in-motion
  • Can capture up to 2000 events including date, time, and weight for down loading (depending on application)
  • RS-232 port
  • Tare/Zero function
  • Optional Printer
  • V-600 series Spec Sheet
The DP8340 is a unique 114mm wide dot matrix impact printer used all around the world in multiple of applications. Its specific width allows it to print report, receipt, data or invoices depending of your needs. Its high reliability and its capability to support 12V, make it a perfect product for many mobile applications in vehicles. Its ability to print black and red has been a great benefit by bringing attention to special items on the receipt.
Upgrade your V-320 to V320S with printer
Vulcan-V320S+printer upgrade For new purchase only: if your system comes with the V-320 series and you want a printer. Upgrade to the V-320S with the optional printer Call
Vulcan-V340S+printer upgrade For new purchase only: if your system comes with the V-320 series and you want a printer. Upgrade to the V-340S with the optional printer Call
Upgrade your V-320 to V600 with printer
Vulcan-V600+printer upgrade For new purchase only: if your system comes with the V-300 series and you want a printer. Upgrade to the V-600 with the optional printer Call
Upgrade your V-200 System
Vulcan-E-203-V320 2 Channel kit V-320 meter and 2 - 2 Lead Vulcoders with new trailer cables. Call for Best Pricing
Vulcan-E-403-V340 4 channel kit V-340 meter and 1 - 2 Lead Vulcoders 1 - 4 Lead Vulcoders with new trailer cables. Call for Best Pricing

 

 

OnBoardScaleSystems.com
Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.
Quotes@OnboardScaleSystems.com

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
sales@OnboardScaleSystems.com
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.