Celebrating 33 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Quotes@OnboardScaleSystems.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Forklift Container scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batcher
Replacement Parts Vac Truck Scales SCI Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
VPG Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Vulcan Deflection Transducer Systems

 

System Accuracy: Typically
+/- 2/3% of full scale load or better.

Deflection Transducer System Onboard Scales for Straight Body Trucks

Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.

The Vulcan Deflection transducer can be installed on several types of truck and trailer suspension components including: steel walking beams, front axles, and thru-trunnions including Mack camel back suspensions.  The transducers mount directly on suspension components, measure the component deflection, and convert the deflection into a corresponding weight.  Deflection transducers can also be placed on load carrying members to provide solutions for other on-board weighing and custom applications.
  • Easy to install - mounts on vehicle suspension components or load carrying members
  • Easy to operate using proven Vulcan electronics
  • Eliminate overweight fines
  • Monitor loading or unloading of weights at remote locations
  • Save time loading, weighing and adjusting the load
  • Reduce time and mileage by minimizing trips to commercial scale
  • Reduce maintenance costs by not overloading the vehicle
  • Prevent hauling freight in excess of contracted weight
Deflection Transducer System Accuracy: Typically +/- 2-3% of full scale load.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.

V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)

VSL Vulcoder:

  • Size: 5.0”W x 2.5”D x 1.5”H (one and two lead Vulcoders)
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
The Vulcan V300 Series Electronics System combines the most advanced electronics with a user-friendly operation. The system works with existing Vulcan load cells and sensors. The V300 Series is ideal for applications requiring up to four channels, and for operators who wish to mix tractors and trailers.

Compatible with Third Party GPS Tracking, Reporting Systems

Meters with RS-232 output (serial data)
  • Easy to Calibrate
  • Compact size allows the meter to be mounted almost anywhere
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Automatically identifies and adjusts for different truck/trailer configurations
  • Select the two channel V320 or the four channel V340 meter depending on your application
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • Simple operation and calibration
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Complete system troubleshooting including individual load cell diagnostics
  • V-300 series Spec Sheet
G-713SA - SINGLE AXLE SPRING SUSPENSION
(1) M32A V320 Meter
(2) V40 VSL Vulcoder - 1 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(1) L51 Deflection Transducer, Neutral Axis (Rear Suspension)
(1) H62 Deflection Transducer Mounting Kit, Neutral Axis (Rear End Housing)
Installation Toolkit, Part No. 59-30048-003 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 20 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-743FA - Additional Add on Front Axle System

(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) V40, VSL Vulcoder - 1 Lead, 10 FT

G-733Max- HENDRICKSON HAULMAAX SUSPENSION
(1) M32A V320 Meter
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(2) L42, Deflection Transducer, Standard, Rear Suspension
(2) H58, Deflection Transducer Mounting Kit, Standard
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 20 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-743FA - Additional Add on Front Axle System

(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) V40, VSL Vulcoder - 1 Lead, 10 FT

G-713MC - MACK CAMEL BACK SUSPENSION
(1) M32A V320 Meter
(2) V40 VSL Vulcoder – 1 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(1) L42, Deflection Transducer, Standard, Rear Suspension
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-743FA - Additional Add on Front Axle System

(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) V40, VSL Vulcoder - 1 Lead, 10 FT

G-733HN - HENDRICKSON HN, HENDRICKSON RT/RTE,
R/RS SUSPENSIONS
(1) M32A V320 Meter
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(2) L42, Deflection Transducer, Standard, Rear Suspension
(2) H65, Deflection Transducer J-Bracket, Mounting Kit
Installation Toolkit, Part No. 59-30048-003 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 22 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-743FA - Additional Add on Front Axle System

(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) V40, VSL Vulcoder - 1 Lead, 10 FT

G-733TR - VOLVO T-RIDE, FREIGHTLINER / STERLING TUFTRAC SUSPENSIONS
(1) M32A V320 Meter
(1) V27 VSL Vulcoder – 2 lead (10')
(1) C01 Cable, 40' Orange Stress-Flex
(2) L51 Deflection Transducer, Neutral Axis (Rear Suspension)
(2) H65, Deflection Transducer J-Bracket, Mounting Kit
Installation Toolkit, Part No. 59-30048-003 is required for this installation.
Optional V41 Setpoint Module
Setpoint Module allows users to program two setpoint weights in the V320 meter which can be used to activate lights or alarms. Lights and alarms not supplied by Vulcan. Version M32A-C21 software required for use with setpoint module.
Ship Wt: 25 lbs. Estimated install time: 10 to 12 HOURS
Notice: This item is non-refundable
Call for Pricing
Installable System: This item is non-refundable.
G-743FA - Additional Add on Front Axle System

(1) L42 Deflection Transducer, Standard (Front Axle)
(1) H58 Deflection Transducer Mounting Kit, Standard
(1) V40, VSL Vulcoder - 1 Lead, 10 FT

 

OnBoardScaleSystems.com
Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 33 years of Service in the Scale Industry.

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
Quotes@OnboardScaleSystems.com
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.
Some manufacture's & states require's us to pay your State Sales Tax.
Most of our manufacture's (RLWS, SI, Vulcan Scales, VPG) has a presence in the states listed below. These States will not honor our tax certificate.
We try to cover the tax if we can. Purchase of mutiple system all tax and shipping are normally covered.
RLWS Taxable States:

California, Florida, Illinois, Maryland, Pennsylvania, Indiana, Louisiana, Massachusetts, Mississippi, New York, Virginia, West Virginia, Wyoming

SI Scales & Vulcan Scales, VPG taxable States:
CALIFORNIA, CONNECTICUT, GEORGIA, ILLINOIS, KANSAS, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, OHIO, PENNSYLVANIA, SOUTH CAROLINA, TEXAS, WASHINGTON.