Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

Industrial Wireless RS-232


Powered by 12Vdc or AC - Wireless RS-232
200mW system with Up to 10,000 feet (3050 m) line-of-sight
or the 1 Watt system with Up to 1 mile line-of-sight
Set includes two unit with set up software.
  Apex C-Link is the most flexible, affordable RF serial data device available for both consumers and OEMs. The system can be set up in minutes to enable local-area communication in industrial, commercial and office applications. Because it uses frequency-hopping spread spectrum technology, it provides reliable communication at up to 115.2 Kbps even in RF-hostile environments.

Apex C-Link's industrial-grade enclosure contains a robust 2.4GHz or 900MHz transceiver. Each Apex C-Link communication system requires a central server node and any number of remote client nodes that operate in point-to-point or point-to-multipoint configurations. Users can create multiple sub-networks by assigning unique radio addresses to specific device groups.

Apex C-Link are approved for operation by FCC (USA), IC (Canada) and CE (Europe). No additional certification is required.
• Replace cable in new equipment installations as well as retrofitting.
• Quickly move RS232 links from machine to machine without costly wiring.
• Set up equipment where it best serves customers — retail stores, service stations, events, etc.
• Upload data to your PC without getting up from the chair.
• Simply attach to the serial ports of each RS232 device.
Specifications Industrial Apex C-Link (2.4GHz Model or 900 Mhz)
Dimensions 4.4 x 2.7 x 1.4 inches (111 x 69 x 36 mm)
Weight 6 oz (170 g)
Cord length 6 feet ( 183 cm)
Serial RS232 DB9 female connector
RS232 data rates
Configurable up to 115.2 Kbps
Output power
200mW or 1 watt
Transmission range
Up to 10,000 feet (3050 m) or 1 mile line-of-sight or 1 mile
Frequency band
2.478 GHz, FHSS or 900 Mhz
Power supply
7 - 18Vdc
Power consumption
400mA typical (200mW radio)
Electrical requirements
Line voltage 100 - 120V (240V outside US); Frequency 50 - 60 Hz
Environmental conditions
Operating temperature -40° to +80°C
Configuration software
Optional easy-to-use software for Windows
Model Description
APEX-C-Link-200-SET 2 Units-External Antennas-Apex C-Link-200mW
$ 740.00
APEX-C-Link-1w-SET 2 Units-External Antennas-Apex C-Link-1 Watt
$ 780.00


Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.