Celebrating 30 years of Service in the Scale Industry.
ApexEgroup LLC
Direct Line: 1-330-476-2282
Quotes@OnboardScaleSystems.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Logging Truck Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales General Trucking Scales Filling Control Scales
Straight Chassis Scales Tipping Refuse Scales Holland ILS fifth wheel Scale Wheel Loader Scales
TradeRoute HL Scales Air Ride Truck Scales Underbody Truck Scales Trailer Filling Scales Automatic Controllers
Deflection Transducers Spreader Scales Forklift Scales NTEP Scales Loss-in Weight Dispensing
Refuse Front Fork Scales Concrete Truck Scale Wheel Weigher Scales Walkie Scales Multi-Ingredient Batchers
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales SI Tuffer Scales NTEP Onboard Scales
Cardinal Scales MSI - RLWS Scales Dump Truck Scales Vulcan Scales Precision Loads
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.

PNT Long-Logger Truck Scales
 
PNT Long-Logger Truck Scales
High-Accuracy On-Board Weighing Systems For Logging Trucks

Complete Long Logger Kit:
1- PNT 2100 indicator w/ manual
2- 8705 Transmitter 2 leads
1- 216-80 Truck Cable
1- 216-35 Truck Cable
4- 532623 26" Load Cells
8- Load Cell Bearing Plates

Hauling Timber Product?
Avoid the cost of underloading and overloading and ensure maximum safe and legal payloads on every tractor and trailer—every trip
Accurate and reliable payload measurement is an important element of profitability and operating safety bulk hauling. Whether for municipal, county, state or private operations, on-board scale system allows optimum, safe and legal use of a truck's payload capacity-both for maximizing loads and preventing the liabilities of overloading.

The Model 2100 In-cab Meter from PN Technologies is used in all on-board scale applications requiring dual channel weight displays. Total vehicle weight is displayed as well as individual tractor and trailer weights. The PNT 2100 meter can be set to cycle automatically between individual channel weights and total weight displays. The operator can press the cycle button at any time to stop and monitor any channel desired.

  • 100 % Compatible with SI-9100GW.
  • Two channel models for long and short loggersB-trains and chip vans.
  • LargeSuper-Bright Red seven-segment LEDs Display.
  • Two-wire (non-polarity sensitive) digital technology.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Rugged and reliable design tested over all environments.
  • Quick and simple calibration.
  • Simple diagnostics allow quick testing of each system component.
  • Compatible with all models of On-board scale load cells and sensors.
  • Transcoders built of heavy-gauge stainless steel.
26" Shear Beam Load Cell (12,500 lb) w/Bearing Plate
Installed and painted
1 Load cell on each side of the bunk
A modern on-board weighing system consists of load cells to sense the load’s weight, transmitters and cables to send the load-cell output to the indicator, and an indicator to change the signals into information usable by the operator. Load cells are precision-machined high-strength steel beams with strain gages bonded inside. The load cell is installed on the truck between the load receiving deck and the truck frame. When loads are applied to the truck, the strain gages sense the weight of the load and send a small electrical signal to the indicator by way of the transmitter. The transmitter provides the voltage to the load cell to power the strain gages. A signal voltage from the load cell is returned to the transmitter where it is converted to a digital signal before being sent to the PNT 2100 indicator through the two-wire cable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.
Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.
Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.
Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.
Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish routes more efficiently and faster with full, legal loads.
Model Description Notice Price
PNT-Long-Logger 1-PNT2100 Indicator w/Manual, 2-Transmitter 2 leads, 1-216-80 Trailer Cable, 1- 216-35 Truck Cable , 4- 26" Load Cells, 8- Load Cell Bearing Plates This item is non-refundable. Call

 

 

 

 

 

 

OnBoardScaleSystems.com
Direct Line - 1-330-476-2282
CopyRight © All Rights Reserved
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.
Quotes@OnboardScaleSystems.com

Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable

OnboarScaleSystems.com Home Page
sales@OnboardScaleSystems.com
Backup Account/International: ApexEgroupLLC@gmail.com
No Customer Data stored on our server.